Table of Contents
Advertisement
Colour monitor 43B1-M
1
Ê
Be sure that the monitor and the computer are switched off.
!
The computer power plug must be pulled out!
The permanently connected data cable is equipped with a 15-pin D-SUB plug for connection to the
computer.
Ê
Connect the connector of the data cable to the active monitor port on the computer and secure
the plug-in connection by tightening the safety screws (1).
If your computer has two monitor ports ("onboard" screen controller and separate
i
graphics card), the monitor port for the separate graphics card is usually active.
Ê
Connect the power adapter cable of the power adapter firmly to the power connector of the
monitor (2) and check whether the socket is securely seated.
Ê
Connect the power cable to the power adapter (3).
Ê
Connect the plug on the power cable supplied to the monitor socket of the computer (4).
Ê
Plug the power connector of the computer into a properly grounded mains outlet.
When you start working with your monitor for the first time you should install the
i
appropriate graphics drivers for your application software. Details of how to do this are
provided in the documentation on your screen controller/the associated driver software.
8 - English
2
3
4
A26361-K883-Z100-1-5E19
- Quick Links:
- Power Cable
- Connecting the Monitor
Hide quick links:
Advertisement
Table of Contents
