Advertisement
POWERS™ Controls No. 6 Pneumatic Damper Actuator
Dimensions
Offset Mounting
Bracket
This bracket is
designed to offset
Universal Mounting
Plate 331-623 or
331-623A from the
ductwork.
NOTE: Depending on
the application, two
brackets may be
required to support
the actuator and
universal mounting
plate.
Siemens Building Technologies, Inc.
Figure 13. Extended Shaft Remote Mounting with Travel Stops.
Dimensions in Inches (Millimeters).
Figure 14. Offset Mounting Bracket 333-176.
Dimensions in Inches (Millimeters).
Technical Instructions
Document No. 155-029P25
December 3, 2004
Page 11
Advertisement
