Slip printer (continued)
Report printer
Procedure
Remote printer (KP#1 through KP#9)
Procedure
• INITIAL FEED# (Use the numeric entry)
Initial line feed for a slip (0 to 64 lines)
• SLIP MAX LINE (Use the numeric entry)
Maximum number of lines printable on a slip (0 to 99)
• VP PRINT TIMES (Use the numeric entry)
Number of times of validation printing (0 to 9)
Program each item as follows:
• TERMINAL# (Use the numeric entry)
Terminal number (1 through 254 : Enter "0" for local device.)
• CHANNEL# (Use the numeric entry)
Channel number (1 through 7)
When you program as "0", no RS-232 channel is assigned.
• PRINTER NAME (Use the selective entry)
Select the printer to be used.
SHARP ER-01PU
SHARP ER-03/04RP
EPSON TM-T88/85
• AUTO CUTTER (Use the selective entry)
Auto cutter function
YES: Enables auto cutter function.
NO:
Disables auto cutter function.
When "ER-03RP" is connected, select "NO."
NOTE
• PAPER SHEET (Use the selective entry)
Select a paper type.
TWO OR MORE:
ONE SHEET:
This option is available when the "TM-300" is selected.
NOTE
Program each item as follows:
• TERMINAL# (Use the numeric entry)
Terminal number (1 through 254 : Enter "0" for local device.)
• CHANNEL# (Use the numeric entry)
Channel number (1 through 7)
When you program as "0", no RS-232 channel is assigned.
• PRINTER NAME (Use the selective entry)
Select the printer to be used.
SHARP ER-01PU
SHARP ER-03/04RP
EPSON TM-T88/85
SHARP UP-T80BP
EPSON TM-300
EPSON TM-U950
Uses two or more sheets.
Uses one sheet.
SHARP UP-T80BP
EPSON TM-300
EPSON TM-U950
207