Cleaning The Sensors; Changing The Batteries In The Remote Control; Replacing The Rechargeable Battery - Miele HS18 Operating Instructions Manual
Hide thumbs
Also See for HS18:
- Operating instructions manual (204 pages) ,
- Operating instructions manual (76 pages) ,
- Operating instructions manual (72 pages)
Table of Contents
Advertisement
Available languages
Available languages
en
Unclip the cover.
Remove the front wheel.
Remove any threads and hair and
clean the front wheel, the cover, and
the slot depression using the cleaning
tool.
Refit the front wheel and close the
cover making sure it clicks into posi-
tion.
Cleaning the sensors
Clean the sensors as required.
Place the robot vacuum cleaner up-
side down on a level, clean surface.
Clean the sensors carefully using a
dry cotton wool bud.
Changing the batteries in the remote
control
The remote control requires two AAA
(1.5 V) batteries.
26
Remove the battery compartment
cover.
Replace the batteries. Make sure the
polarity is correct.
Close the battery compartment cover.
Observe the special instructions re-
garding the handling and disposal of
batteries found in the sections "IM-
PORTANT SAFETY INSTRUCTIONS"
and "Caring for the environment" at
the beginning of these operating in-
structions.
Replacing the rechargeable battery
You will require an original Miele lithium-
ion rechargeable battery:
– YCR-M05 for Scout RX2
– YCR-MT12 for Scout RX2 Home Vi-
sion
The rechargeable battery compartment
is located in the robot vacuum cleaner's
storage compartment.
Remove the dust box.
Open the rechargeable battery com-
partment by unlatching the cover up-
wards.
Advertisement
Chapters
Table of Contents
