Table of Contents
Advertisement
domain default enable
Syntax
domain default enable isp-name
undo domain default enable
View
System view
Default level
3: Manage level
Parameters
isp-name: Name of the ISP domain, a case-insensitive string of 1 to 24 characters.
Description
Use the domain default enable command to specify the default ISP domain. Users without any domain
name carried in the usernames are considered to be in the default domain.
Use the undo domain default enable command to restore the default.
By default, the default ISP domain is the system predefined ISP domain system.
There can be only one default ISP domain.
The specified domain must already exist; otherwise, users without a domain name in the username
cannot pass authentication.
To delete the ISP domain that is used as the default ISP domain, you must change it to a non-default ISP
domain first by using the domain default disable command.
Related commands: domain, state, and display domain.
Examples
# Create a new ISP domain named test, and configure it as the default ISP domain.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] quit
[Sysname] domain default enable test
idle-cut enable
Syntax
idle-cut enable minute [ flow ]
undo idle-cut enable
View
ISP domain view
Default level
2: System level
Parameters
minute: Idle timeout period, in the range 1 to 120 minutes.
76
Advertisement
Table of Contents
