Display Configuration - Siemens FEC920 User Manual

Flow energy calculator
Hide thumbs Also See for FEC920:
Table of Contents

Advertisement

Start Month
End Time, End On, End Day, End Month

6.1.3 Display configuration

This allows the user to set display brightnesses and screen saver details, to select a display mode as the 'Home'
page, and to enable/disable the various display modes. The normal 'Select, Scroll, Enter' editing technique is
used as has been previously described.
Brightness
Save After
Saver Brightness
Home page
HPage Timeout
Vertical Trend
A
September 18
FEC920: USER GUIDE
Select the month in which DST is to commence.
As for 'Start Time' etc. above, but specifies the end time and date for daylight savings.
Instrument.Display
Brightness
70%
Save After
7 min
Saver Brightness
50%
Home Page
V.Trend
HPage Timeout
Off
Vertical Trend
Horizontal Trend
Vertical Bar
Horizontal Bar
Promote List
Trend Backgrnd
Black
History Backgrnd
DarkGrey
H.Trend Scaling
Hide
Faceplate Cycling
Off
Setpoint Color
Red
Number Format
Rounded
USB Auto Scan
No
Figure 41 Display menu (expanded to show all fields)
Allows the user to select a normal operating brightness for the screen from 10% to 100%,
in 10% steps.
The elapsed time (since last button press) before the screen switches from 'Brightness' to
'Saver Brightness'. (Off = saver function disabled).
The screen saver brightness. Valid entries are 10% to 100% inclusive, in 10% steps.
Using a lower power when not 'in use' not only saves power, but also increases display
life. Typical screen power consumption is 0.5W at 100%, falling in a linear fashion to
0.05W at 10%.
Allows any display mode to be chosen as the 'Home' page. This is the page that the
instrument displays at power up, and also the page displayed when the 'Home' key is
selected from the top level menu (Section 5.3). The selected display mode (vertical trend
in Figure 41) is always enabled in the following display mode enable fields (its 'tick' is
grayed out and cannot be edited). See Section 5.4 for a description of the available
modes.
The elapsed time (since last button press) before the display returns to the home screen.
(Off = disabled).
This is the default home page, and its tick is grayed. If this is not the home page, the tick
can be changed to a cross, by highlighting it and operating the scroll button.
A5E45696052A Rev-AA
Home page
(always enabled)
Mode disabled
Mode enabled
Page 49

Advertisement

Table of Contents
loading

Table of Contents