Table of Contents
Advertisement
ANSWERING
SYSTEM
RING DELAY SWITCH
(2/4/AUTO)
The RING DELAY switch lets you
choose the number of times the
telephone
rings before a call is
answered.
-
2 position:
Incoming calls are answered on
the second ring.
-
4 position:
Incoming calls are answered on
the fourth ring.
-
AUTO (Toll Saver) position:
The first incoming call is
answered on the fourth ring,
and later calls are answered on
the second ring. If you call your
number from another phone
and hear three rings, you know
you have no messages and can
hang up and save the cost of
the call. When you reset the
unit to the auto answer mode,
the unit again answers the first
new call on the fourth ring.
T
RING DELAY switch
CPC ON/OFF
The telephone
systems in many
areas provide a disconnect
pulse
when a caller hangs up. If the
CPC/ANS.ONLY
switch (located
on the side of the base station) is
set to CPC ON, the CLA-1 380
stops recording and returns to the
auto answer mode when this
disconnect
pulse is received. This
eliminates
annoying recordings of
dial tones between messages.
The CPC/ANS.ONLY
switch
should be kept in the CPC OFF
position if:
-
Your telephone
is equipped
with call waiting service
-
You have a noisy telephone
exchange
(If the switch is not in the CPC
OFF position, your calls may be
disconnected
prematurely.)
ANSWER
ONLY
If you do not want messages to be
received and recorded, set the
switch to the ANS.ONLY
position.
The unit then plays your outgoing
message but does not record
incoming messages.
CPC/ANS.ONLY
switch
\
-13-
Advertisement
Table of Contents
