Configure a A-020W-A
Procedure 28
1
Figure 33
Table 31
2
3
4
80
Release 05.08.01 | June 2018 | Edition 01
DMZ and ALG configuration
Select Security > DMZ and ALG from the top-level menu in the Ethernet Gateway window,
as shown in Figure 33.
DMZ and ALG window
Table
31
describes the fields in the DMZ and ALG window.
DMZ and ALG parameters
Field
Description
ALG Config
Select the check boxes to enable the protocols to be supported by the ALG: FTP,
TFTP, SIP, H323, RTSP, L2TP, IPSEC, PPTP
DMZ Config
WAN Connection List
Choose a WAN connection from the drop-down menu
Enable DMZ
Select this check box to enable DMZ on the chosen WAN connection
DMZ IP Address
Choose Customer Setting and enter the DMZ IP address or choose the IP address
of a connected device from the drop-down menu
Configure ALG.
Click Save ALG.
Configure DMZ.
3FE-47511-AAAA-TCZZA
7368 ISAM CPE A-020W-A Product Guide
Issue: 01