3.2
Installation Mode
Wall-mounting
Install the SmartLogger on a wall that is flat and has the bearing capacity to securely hold the
SmartLogger.
1. Determine mounting holes based on the hole positions in the mounting ears, and mark
the mounting holes using a marker.
2. Drill holes by using a hammer drill and install expansion sleeves, washers, and tapping screws.
Unit: mm
3. Put the tapping screws through the SmartLogger mounting ears and washers into the mounting
holes in the wall.
Screw assembly for wall-mounting:
(1) ST3.5 tapping screw
(2) Washer
(3) Expansion sleeve
Unit: mm
If you need to use a ladder to
install the device on a high
position, take measures to protect
yourself from falling down.
14