SYSTEM STARTUP
1.2 HD Initialization
START
Set the SENS switch
corresponding to the
system to be initialized
(CPU0, CPU1) to "1" on
the EMA card.
Make sure the write-protect
tab is set to "write enable
(permit)" position on the
"Basic Software #1" FD. Note
Insert the FD "Basic
Software #1" into the FDD.
Flip the MBR key on the CPR
[DOWN → UP → DOWN].
Slide the write-protect tab
is set to "write inhibit
(protect)" position on the
"Basic Software #1" FD. Note
END
Skip this step in the U.S.A, Canada, and Australia.
Note:
Removal or Make Busy of the HFD card is not
WARNING
allowed while the Floppy Disk or Hard Disk is
being accessed.
SENS SW
"6"
"3"
"4"
"1"
CHAPTER 3
Page 20
Revision 1.0
HD
Format
7SEG LED
HD FORMAT
COPY FD
MAKING DIRECTORY IN THE HD
FORMAT
ND-70373 (E)
<7-Segment LED Indication on the EMA card>
1
2
<HD Initial End>
FUNCTION
HD
COPY
MAKING DIRECTORY
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
3