Mounting - Bosch 440 Series Installation Manual
Analog detectors and bases, 440 family detectors and bases
Hide thumbs
Also See for 440 Series:
- Quick install manual (21 pages) ,
- Installation and operation manual (95 pages)
Advertisement
Available languages
Available languages
6
en | Mounting
3
Mounting
Notice!
Smoke detectors are not to be used with detector guards unless the combination has been
evaluated and found suitable for that purpose.
–
–
3.1
Mounting the Detector
3
2
1
3
Figure 3.1: 6-inch and 4-inch Mounting Bases
Position
1
2
3
4
1.
2018.08 | 6.0 | F.01U.123.589
Follow NFPA-72 guidelines for mounting locations. For commercial and industrial
installations, 30 ft. (9 m) spacing between smoke detectors is recommended.
The electrical boxes must be large enough to accommodate the number and size of
conductors as specified by the National Electrical Code or the local Authorities Having
Jurisdiction (AHJ).
3
Description
Mounting holes
Base skirt
Release tabs
Semicircle notch
Mount the base using the two oblong mounting holes (see Position 1).
If you mount the detector with a 6-inch base, first remove the base skirt (2) from the
mounting base using a screwdriver to release the 4 tabs (3).
3
1
Installation Guide
Analog detectors and bases
4
1
Bosch Security Systems, Inc.
1
Hide quick links:
Advertisement
Chapters
