[3] Control by the projector
* PC provides the Network Capture.
PC1
PC3
Select input mode to "Network" previously.
1
Select "Network Capture" icon from "Network" menu. Press SELECT button on the pro-
jector twice to display the network capture setting pallet.
2
Select PC number to connect .
3
Select "Connect" and then press SELECT button to start capturing. The screen image of
the selected computer will appear on the projected screen in real time.
4
To end capturing, select "Disconnect" and then press SELECT button.
Set "On" when
using the wireless
mouse function
The IP address of the connecting PC should be registered previously (+ p.72).
✐
If the error message appears, check item "Parameter set up" (+ p.71).
✐
Selectable computer from the projector is PC1 to PC10. Other PCs cannot be selected from the
✐
projector.
The projector does not provide the function to register the IP address of the computer and to set
✐
the parameter of the capturing. They should be registered by using the web browser previously
(+ p.71-72).
Project a screen
image of PC1 with
PC2
PC2.
Capture
PC4
PC5
PJ2
PJ1
PC6
OWNER'S MANUAL [XP57 Series]
Using the Real Time Capture
* Start capturing of
the PC1 from the
projector PJ2.
PJ-NET ORGANIZER
7