Setting up the machine
2.9 Manual mode
2.9.2.2
Selecting a tool
Procedure
72
1.
Select the "T, S, M" softkey in "JOG" mode.
2.
Press the "T, S, M" softkey.
3.
Enter the name or the number of the tool T in the entry field.
- OR -
Press the "Tool" softkey to open the tool list, position the cursor on the
desired tool and press the "To Manual" softkey.
The tool is transferred to the "T, S, M... window" and displayed in the
field of tool parameter "T".
4.
Select the tool cutting edge D or enter the number directly in the field.
5.
Press the "CYCLE START" key.
The tool is automatically swung into the machining position and the
name of the tool displayed in the tool status bar.
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
HMI sl Turning