Table of Contents
Advertisement
2
MENU-SPECIFIC SETTINGS
(when optional interface board is installed)
3. VIDEO INPUT SET
When a multiplexer (sold separately) has been connected
to the unit, you can make settings as described below.
Multiplexer
Set the connected multiplexer's manufacturer as described
below.
1
Select the manufacturer of the
multiplexer from the screen's pull-down
menu.
[Settings] (
indicates default setting.)
Setting
This item should be selected when no
NO USE
multiplexer is being used.
As these multiplexers can decode channel
information, whenever multiplexer images are
SANYO
being recorded, you will be able to indicate a
camera number (i.e., channel information) from
the recorded images for playback.
This item should be selected when using a Sony
OTHERS1
multiplexer. Decoding of channel information will
be possible.
This item should be selected when using a DM
OTHERS2
or Robot multiplexer. Decoding of channel
information will be possible.
This item should be selected when using a
OTHERS3
multiplexer that has not been manufactured by
Sanyo, Sony, DM, or Robot.
When a Sanyo, Sony, DM, Robot multiplexer or any
other multiplexer capable of decoding channel
information is connected, it will be possible to specify
channel numbers for playback. For details regarding the
playback method, see "Playing back recorded images"
( P. 113).
Description
100
English
Advertisement
Table of Contents
