SYSTEM settings
b Restoring the password input
1
Press the MENU button, select SYSTEM and press
the ENTER button.
2
Select ADMIN PASSWORD using the control button
({|) and press the ENTER button.
The Current password input screen is displayed.
ADMIN PASSWORD
Current:
* * * *
- - - -
3
Press the ENTER button without inputting
anything.
The New password input screen is displayed.
4
Input the new password using the camera selection
buttons and press the ENTER button.
The Confirm password input screen is displayed.
ADMIN PASSWORD
New:
* * * *
- - - -
ADMIN PASSWORD
Confirm:
* * * *
- - - -
5
Enter the same password as in New using the
camera selection button (1/2/3/4) and press the
ENTER button.
The message "PASSWORD CHANGED!!" is displayed
so press the ENTER button.
To go to the live screen, press the EXIT/STOP button.
31
E
Setting a NETWORK PASSWORD
A password can be set to limit the access to the network for
network users. The initial value is "1111".
1
Select NETWORK PASSWORD using the control
button ({|) and press the ENTER button.
The Current screen is displayed.
2
The following setting method is identical to the one
described in "Setting an ADMIN PASSWORD".
NETWORK PASSWORD
* * * *
Current:
- - - -
F
Setting the DATE FORMAT
Refer to "Setting the clock (CLOCK SET)". (P7)
G
Setting the CLOCK SET
Refer to "Setting the clock (CLOCK SET)". (P7)
H
Setting the PTZ CONTROL
Refer to "Operating the PTZ camera". (P11)
I
Setting the LANGUAGE
Refer to "Setting the language (LANGUAGE)". (P9)