Table of Contents
Advertisement
USING
YOUR PHONE
Using Hold, Conference and Transfer
Placing a Call on Hold
1.
During a call, press CLEAR/INT'COM on the handset to place the caller on hold. If you leave a caller on hold for more
than ten seconds, the display screen will read, Line On Hold.
2.
To return to the party on hold, press /FLASH or
Notes:
•
You can only place a caller on hold for five minutes. Once five minutes has passed, that party's line will be disconnected and the phone will
return to standby.
•
While a call is on hold, Caller ID and Call Waiting cannot be received.
Conferencing
If you have more than one handset, up to three people can participate in a conference call. A three-way conference call
consists of an outside line and two handsets. You can easily join a call already in progress. The handsets must be currently
registered to the same base ( see page E16 ).
1.
Press /FLASH or
2.
To hang up, return the handset to the cradle or press . The other party will still be connected to the call.
Transferring a Call
You can transfer a call from one handset to another. The handsets must be currently registered to the same base ( see page
E16 ).
1.
During a call, press CLEAR/INT'COM.
2.
Use
or
to select the handset you want to transfer the call to, and then press MENU/SELECT. Select ALL to page
all other handsets. The call will automatically be placed on hold, and a paging tone sounds. To cancel the transfer,
press /FLASH or
UC590EH.indd E27
UC590EH.indd E27
to join the call.
.
on a handset. The phone will return to the holding party.
E27
8/19/2008 11:39:06 AM
8/19/2008 11:39:06 AM
Advertisement
Table of Contents
