7.
Set "Refresh settings" of "Module Parameter" of the pulse input module as shown below.
[Navigation window] [Parameter] [Module Information] [RD60P8-G] [Refresh settings]
8.
Write the set parameters to the remote head module on the intelligent device station. Then reset the remote head
module or power off and on the system.
[Online] [Write to PLC]
For parameters of the remote head module that are not described in this procedure, set default values. For
details on parameters of the remote head module, refer to the following.
MELSEC iQ-R CC-Link IE Field Network Remote Head Module User's Manual (Application)
Appendix 4 Operation Examples of When the Remote Head Module Is Mounted
A
APPX
103