Table of Contents
Advertisement
Displays and Mode Selector
Controlling the Operating Status
There are different ways of controlling the mode of the CP 443-5 Basic, as follows:
S Mode Selector
S NCM S7 for PROFIBUS configuration software
S SIMATIC Manager in STEP 7
To control the mode from STEP 7 / NCM S7 for PROFIBUS, the mode selector
must be set to RUN.
Mode Selector
With the mode selector, you can set the following operating statuses:
S Switch from STOP to RUN:
The CP reads the configuration data into the work memory and then changes to
the RUN mode.
S Switch from RUN to STOP:
The CP changes to STOP with the following results:
– Established connections (FDL, FMS connections, configured, and
unconfigured S7 connections) are terminated
In the STOP mode
– Configuration and diagnostics are possible
– The time of day is distributed
Note
Refer to the explanations in the manual /2/ on the topic of loading the database on
the CP.
B3–12
www.gkbpx.com
CP 443-5 Basic for PROFIBUS / Manual Part B3 –
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
Release 11/2002
C79000-G8976-C161-03
- Quick Links:
- Properties / Services
Hide quick links:
Advertisement
Table of Contents
