Table of Contents
Advertisement
1. Make sure the communications and radio parameters on your computer are config-
2. Start Intermec Settings.
3. Choose Communications > 802.11 Radio > Microsoft Security.
4. For Infrastructure Mode, choose Infrastructure.
5. For Network Authentication, choose WPA-PSK. Data Encryption automatically
6. For Pre-Shared Key, enter the pre-shared key or the passphrase.
7. Save your settings.
Configure 802.1x Security with Microsoft
Use the following procedure to configure 802.1x security with Microsoft security. Hon-
eywell recommends that you use WPA2-802.1x instead of 802.1x-WEP if possible.
1. Make sure the communications and radio parameters on your computer are config-
2. Start Intermec Settings.
3. Choose Communications > 802.11 Radio > Microsoft Security.
4. For Infrastructure Mode, choose Infrastructure.
5. For Network Authentication, choose Open.
6. For Data Encryption, choose WEP.
7. For 802.1X Authentication, choose TLS or PEAP.
8. If you choose TLS:
9. If you choose PEAP:
56
ured.
defaults to TKIP for WPA and AES for WPA2.
The pre-shared key must be a value of 32 hex pairs preceded by 0x for a total of 66
characters. The value must match the key value on the authenticator. The passphrase
must be from 8 to 63 characters. After you enter a passphrase, the computer
internally converts it to a pre-shared key.
ured.
a. Load a user and root certificate on your computer. For help, see
Certificate.
b. Choose Properties. The Certificates dialog box appears.
c. Select the certificate you want to use from the list. The User Logon dialog box
appears.
d. Enter a User Name and Domain and tap OK.
e. Tap OK to exit the Certificates dialog box.
f.
Tap OK to save the Microsoft Security settings.
a. Load a root certificate of the authentication server on your computer. For help,
see
Load a
Certificate.
b. Tap OK to save the security settings and the User Logon dialog box appears.
c. Enter a User Name, Password, and Domain. Select Save Password if you want
to save the password for future authentication sessions.
d. Tap OK to save the Microsoft Security settings.
CV41 Vehicle Mount Computer (Windows CE) User Guide
Load a
Advertisement
Table of Contents
