Table of Contents
Advertisement
Using the Crystal PlayBack
Press CRYSTAL PB to compensate a poor rental tape.
1
Insert a tape and press PLAY.
2
Press the CRYSTAL PB button on the remote control, and then CRYSTAL
PB option is displayed with Off.
3
To activate (to On) the feature, press the CRYSTAL PB button again.
The Crystal Playback (IPC) activates only when a tape is
being played.
If the tape is reinserted, the CRYSTAL PB becames Off.
Adjusting the Picture Quality during Playback
This set has an inbuilt tape alignment system (A.TRK) that selects
the optimum position for the tape automatically. If, however, noise
bars (streaks) appear at the top or bottom of the picture during
playback (particularly in slow motion), you can adjust the
alignment of the image to obtain the best possible picture.
Picture stability can be adjusted more easily in the Pause and Slow
Motion modes.
To adjust alignment, press the TRK
and stable.
Even if you cannot remove all noise bars, choose the
setting that gives the clearest picture.
Adjusting the Picture Contours
When playing back a cassette, you can change the picture contours
in line with your personal preferences. Three settings are available:
Normal, Sharp, Soft
1
Press V.MENU (
) to display the VCR menu.
2
Select the PICTURE option by pressing the P
number of times.
3
Press + or - to select one of the following options:
for a standard picture
NORMAL
for a crisper picture
SHARP
for a softer picture
SOFT
4
When you are satisfied with the setting, press V.MENU (
times to return to normal viewing.
or
buttons until the picture is clear
or
buttons the required
) one or more
CRYSTAL PB
Off
REC
EJECT
P/S
CRYSTAL PB
INDEX
MEMORY
SLEEP
TRK
LANG.SEL
CLEAR
REC
EJECT
P/S
CRYSTAL PB
INDEX
MEMORY
SLEEP
TRK
LANG.SEL
CLEAR
V.MENU
MUTE
P
VCR MENU
RECORD PROGRAMME
REPEAT
: OFF
PICTURE
: NORMAL
TAPE SELECT
: E180/T120
V.SYSTEM
: AUTO
ADJUST
SELECT
EXIT
25
Hide quick links:
Advertisement
Table of Contents
