Table of Contents
Advertisement
APPENDIX B Factory Default
Factory Default sets the program back to the condition at the time of purchase.
Please note that after Factory Default has been enabled, network information is also deleted, so establishing
a connection is impossible. Refer to Chapter 4, Setting an IP Address, in order to set a new IP address.
How to Enter the Factory Default
(1) Power on the SNS-110 or push the 'Reset' button in front of the SNS-110 while pushing the 'PRESET'
button. Then the Power LED of SNS-110 turns on and off just one time. The turn state of Power LED
says that the progress of Factory Default is going on. Hole on pushing the 'Reset' button.
(2) When the progress of Factory Default cornplete, the Power LED turns on again.
Stop pushing 'Reset' button.
(3) All the setting of SNS-110 returns as the state of purchase.
Values for setting up SNS-110
Items
Camera 1~4
Camera Input
Size
Video Quality
Text Display
PAN/TILT/ZOOM
Apply to
P/T/Z
Device
Baud Rate
Data Bit
Stop Bit
Parity Bit
Camera 1 ldentity
Camera 2 ldentity
Camera 3 ldentity
Camera 4 ldentity
Quad/
Quad Size
Sequential
Sequential Size
Sequential Interal
System
Web
Date & Time
Transmitter
Security
Software Upgrade
Factory Default Value
Blank
Normal
Low
Blank/No
Disable
Only Cemera 1~4
None
2400
8
1
None
0
1
2
3
Normal
Normal
3
NTSC
2001/January/1 00:00:00
Administration ID:root/Password:w2000
User ID: guest 1/Password:guest1
Password Enable
Blank
65
- Quick Links:
- Overview
Hide quick links:
Advertisement
Table of Contents
