Hitachi Compute Rack 220H Getting Started Manual page 36
Hide thumbs
Also See for Compute Rack 220H:
- User manual (80 pages) ,
- Replacement manual (80 pages) ,
- Bios manual (145 pages)
Table of Contents
Advertisement
Network interface connectors 1, 2
The status LEDs on the connector are explained as follows.
Figure 2-8: Network interface connectors status LED
Table 2-8: Network interface connectors status LED indicate
Location
1
2
* AC power is still supplied even if the power of the system unit is turned off, but this LED will be turned
off because only link by 10BASE-T can be established.
2-10
1
2
Name
Green-On
Green-Blink
Activity LED
Off
Amber-On*
Green-On*
Amber-Blink
Link LED
Green-Blink
Off
Onboard LAN controllers (network interfaces) displayed by the
•
device manager are as follows:
–
Onboard LAN1: PCI bus 8, device 0, function 0
–
Onboard LAN2: PCI bus 8, device 0, function 1
The number of the network adapter which is the network interface
•
connector recognized by the device manager may not match to the
network interface connector number.
Hitachi Compute Rack 220H Getting Started Guide
State
A link with a hub has been established.
Data is being transmitted or received.
A link with a hub has not been established.
A 1000BASE-T link with a hub has been
established.
A 100BASE-TX link with a hub has been
established.
A 1000BASE-T link with a hub is being
established.
A 100BASE-TX or 10BASE-T link with a hub is
being established.
A 10BASE-T link with a hub has been
established or link with a hub has not been
established.
The Activity LED shows either case.
Overview
Description
Hide quick links:
Advertisement
Table of Contents
