Remote Control See “Remote Control” in the owner’s instructions for details. 1 POWER Turns the TV on and off. 2 TV Selects the TV mode directly. 3 NUMERIC BUTTONS Press to change the channel. Press to select additional channels(digital and analog) being broadcast by the same station.
Connections Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI DVD Player or Cable Box/ Satellite receiver (Set-Top Box) HDMI Cable (Not supplied) Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different ➣ back panel configuration.
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables TV Rear Panel Component Cable (Not supplied) Audio Cable (Not supplied) Connecting a Camcorder Camcoder DVD Player or Cable Box / Satellite receiver (Set-Top Box) TV Side Panel...
Connecting a VCR Video Connection VCR Rear Panel Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape. Each VCR has a different back panel configuration. ➣ When connecting a VCR, match the color of the connection terminal to the cable.
Each Digital Audio System has a different back panel configuration. When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver.
Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer. Connect an HDMI/DVI cable between the HDMI/DVI IN jack on the TV and the PC output jack on your computer.
When selecting the Cable TV system: Press the ENTER button to start the auto program. Press the ◄ or ► button, then press the ▲ or ▼ to select the correct analog signal cable system source among “STD”, “HRC”, and “IRC”. Press the ENTER button.
ENTER button. Press the ENTER button to select “All”. Press the ◄, ►, ▲ or ▼ button to select a channel to delete, then press the ENTER Press the ▲ or ▼ button to select “Delete”, then press the ENTER button to delete the channel.
Press the SOURCE button on the Remote Control You can select the TV mode or an input source connected to the TV set. Use this button to choose an input source that you would like to watch. Available signal sources: TV, AV, S-Video, Component, PC, HDMI.
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Poor picture Poor sound quality. No picture or sound.
Page 12
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLDWIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente. Country...