Table of Contents
Advertisement
Chapter 6 Troubleshooting
Warning Message
XXXX print head is over-
heated.
"XXXX" represents Black, Cyan,
（
Magenta, or Yellow.)
Adjusting the feed interval
(cleaning mode 2)
Data transmission is not
completed
The battery for the clock has
ran out
Unknown warning XXXX
("XXXX" represents number)
184
Warning Content
Adjust the paper feed interval
to lower the print head
temperature.
When Special Settings Auto
Cleaning Mode 2 is selected,
the paper feed interval is
automatically adjusted.
The paper feed interval was
adjusted because data transfer
processing from the computer
was not completed in time.
The clock's (RTC) battery needs
to be replaced.
An unknown warning was
returned.
Handling
Please wait a while.
To cancel the print job, click
[Cancel Print Job] on the status
monitor.
Please wait a while.
To cancel the print job, click
[Cancel Print Job] on the status
monitor.
To cancel automatic adjustment
of the paper feed interval, open
the printer driver Utility window
and turn [Special Settings] ->
[Auto Cleaning Mode 2] off.
P.95
（→
）
Printing will resume as the
processing progresses. Please
wait a moment.
To cancel the print job, click
[Cancel Print Job] on the status
monitor.
Take note of the message
displayed and contact your
place of purchase.
If the same error occurs again,
update the printer drivers and
firmware to the latest versions.
If the same error occurs again,
take note of the message
displayed "XXXX" and contact
your place of purchase.
Advertisement
Table of Contents
Troubleshooting
