Table of Contents
Advertisement
34 | Command Reference | Maintenance and operation functions
[Example]
Erase the startup configuration.
SWR2311P#erase startup-config
Succeeded to erase configuration.
SWR2311P#
4.3.6 Copy startup configuration
[Syntax]
copy startup-config src_config_num dst_config_num
[Parameter]
src_config_num
dst_config_num
[Input mode]
priviledged EXEC mode
[Description]
Copy the startup settings (startup config) and the information associated with them.
[Example]
Copy startup config #0 to startup config #1.
SWR2311P#copy startup-config 0 1
Succeeded to copy configuration
SWR2311P#
4.3.7 Set description for startup config
[Syntax]
startup-config description config_num line
no startup-config description config_num
[Parameter]
config_num
line
[Input mode]
priviledged EXEC mode
[Description]
Specify a description for the applicable startup config.
If this command is executed with the "no" syntax, the description is deleted.
The description is shown at the beginning of the execution result of the show startup-config command.
[Example]
Specify a description for startup config #1.
:
Copy source configuration number
Setting value
<0-4>
sd
:
Copy destination configuration number
Setting value
<0-4>
sd
:
<0-4>
Configuration number
:
Single-byte alphanumeric characters and single-byte symbols (63 characters or less)
Description for applicable startup config
Description
Startup configuration #0-#4
Startup config in SD card
Description
Startup configuration #0-#4
Startup config in SD card
Hide quick links:
Advertisement
Table of Contents
