Samsung VP-M102 Owner's Instruction Manual page 51
Samsung digital camcorder owner's instruction book
Hide thumbs
Also See for VP-M102:
- Owner's instruction book (129 pages) ,
- User manual (9 pages) ,
- Owner's instruction book (128 pages)
Advertisement
You can view usable memory and total memory space of the CAM.
1. Move [Mode Selector] down to turn on the CAM and move it down again.
The Mode Selection screen appears.
2. Move the [
/ ] switch to select
System Settings
3. Move the [
/ ] switch to select <Memory> and press the [OK] button.
4. Move the [ / ] switch to select <Memory Space>.
5. Press the [Back] button to finish setting.
Note
If you select <Back> in the menu, the previous menu appears.
2
and press the [OK] button.
3
4
1. Connect the CAM to the PC with the USB cable.
2. Move [Mode Selector] down to turn on the CAM.
USB menu screen appears automatically.
3. Move the [
/ ] switch to select <USB 2.0 MassStorage> or
<USB 1.1 MassStorage> and press the [OK] button.
Your PC recognises the USB device automatically. You may install the USB Driver manually
on Windows 98SE operating system.
4. Disconnect the USB cable if you finish storing.
Notes
Select <USB 1.1 MassStorage> when <USB 2.0 MassStorage> does not work depending on your PC environment.
If you disconnect the USB cable from the PC or the CAM during the data transfer, the data transfer will stop and
the data may be damaged.
If you connect the USB cable to a PC using a USB HUB or with other device at the same time, it might cause conflict
and may not work properly. If this occurs, remove all other devices and try the connection again.
Install the Windows 98SE Driver on Windows 98SE operating system using supplied CD. Refer to page 113 for further details.
It takes about 30 minutes if you download or upload the file of 1GB by connecting the USB cable.
Advertisement
