LG LNP2810 series Owner's Manual
Network dome camera
Hide thumbs
Also See for LNP2810 series:
- Owner's manual (63 pages) ,
- Owner's manual (38 pages) ,
- Owner's manual (56 pages)
Advertisement
Quick Links
OWNER'S MANUAL
Network Dome Camera
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
LNP2810 series
LNP2810T series
Specifications
Item
LNP2810 Series
LNP2810T Series
Image Sensor
4.5 mm (1/4 type) CMOS
Lens
x28 Zoom, f = 3.5 mm to 98 mm
Resolution (Maximum)
Up to 1280 x 720
Day&Night
ICR Day & Night (Day / Night / Auto)
Mininum
Color
0.8 lx (F1.5, Sens-up off ), 0.16 lx (F1.5, Sens-up x32)
Illumination
B/W
0.01 lx (F1.5, Sens-up off ), 0.000 1 lx (F1.5, Sens-up x32)
White Balance
Auto / ATW / One Push / Manual
Shutter Speed
1/160 to 1/10 000
Iris
Auto / Manual
BLC
Off / WDR/ BLC
3D-DNR
OFF / LOW / MIDDLE / HIGH
AGC
OFF / LOW / MIDDLE / HIGH
Privacy Mask
8 Masks
Multi-Streaming
Dynamic Profile (Up to 7)
ROI (Region of Interest)
Support
Video Out
1xBNC
Frame Rate (Maximum)
30 fps @ 720p
Bit Rate
256 kbps to 10 240 kbps
Auto Tracking
No Support
Support
Audio Compression
G.711, G726
Audio In/Out
1/1
Sample Rate
8 KHz
Audio Bit Rate
G.711: 64 kbps, G.726: 24 kbps, 32 kbps
Ethernet
10/100 Ethernet
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
•
A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this
product in the end user.
•
Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries according to
the manufacturer's instructions.
•
Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces
or shall be provided with brushings.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Protocol
IPv4 and IPv6
TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP
IPv4
FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG)
Open Protocol
ONVIF 2.2 Profile S, PSIA 1.1
Remote S/W
LVi510, Mobile Application (IPhone, Android, iPad)
Pan/Tilt
Travel Range
Pan:360˚(Endless), Tilt:180˚
Speed
Preset
500˚/second
Jog
0.1˚ to 360˚/second
Preset
256
Pattern
4 Patterns (760 command/Pattern)
Auto Pan
2 points to 8 points
Group
10 Groups (8 presets/Group)
Sensor /
Sensor
4 Inputs, Photo-Coupler Input
Alarm
Alarm
2 Relay Outputs, Max Load : DC 30 V 1 A / AC 125 V 0.3 A
IP Module Reset
Support
Terminal
Misc.
Mount Accessory
Mount Adaptor
Material
Aluminum, Plastic sunshield
Rated Power
PoE+ / AC 24 V (49 W)
Waterproof
IP66, IK10
Fan
Always ON
Operation
-20˚C to 50˚C
Temperature
Weight
3.3 Kg
Dimension (Ø x H)
195 mm x 229 mm
Important Safety Instructions
Warning
• Do not install this equipment in a confined
1.
Read these instructions.
space such as a bookcase or similar unit.
2.
Keep these instructions.
• Wiring methods shall be in accordance with
3.
Heed all warnings.
the National Electric Code, ANSI/NFPA 70.
4.
Follow all instructions.
• This is a class A product. In a domestic
environment this product may cause radio
5.
Do not use this apparatus near water.
interference in which case the user may be
6.
Clean only with dry cloth.
required to take adequate measures.
7.
Do not block any ventilation openings.
• To reduce a risk of fire or electric shock, do
Install in accordance with the
not expose this product to rain or moisture.
manufacturer's instructions.
Caution
8.
Do not install near any heat sources such
• This installation should be made by a
as radiators, heat registers, stoves, or other
qualified service person and should
apparatus (including amplifiers) that
conform to all local codes.
produce heat.
• To avoid electrical shock, do not open
9.
Do not defeat the safety purpose of
the cabinet. Refer servicing to qualified
the polarized or grounding-type plug.
personnel only.
A polarized plug has two blades with
one wider than the other. A grounding
• The apparatus shall not be exposed to
type plug has two blades and a third
water (dripping or splashing) and no
grounding prong. The wide blade or the
objects filled with liquids, such as vases,
third prong are provided for your safety.
shall be placed on the apparatus.
If the provided plug does not fit into
NOTICE: For safety marking information
your outlet, consult an electrician for
including product identification and supply
replacement of the obsolete outlet.
ratings, please refer to the main label on the
10. Protect the power cord from being
bottom or rear of the apparatus.
walked on or pinched particularly at
plugs, convenience receptacles, and the
Contact office for compliance of this product:
point where they exit from the apparatus.
LG Electronics European Shared Service Center B.V.
11. Only use attachments/accessories
European Standard Team
specified by the manufacturer.
Krijgsman 1
1186 DM Amstelveen
The Netherlands
Part Names and Functions
a
b
c
d
e
f
g
h
i
Handling of the unit
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
Be careful not to spill water or other liquids on
manufacturer, or sold with the apparatus.
the unit. Be cautious not to get combustible or
When a cart is used, use caution when
metallic material inside the body. If used with
moving the cart/apparatus combination
foreign matter inside, the camera is liable to
to avoid injury from tip-over.
fail or to get cause of fire or electric shock.
•
Remove dust or dirt on the surface of the
lens with a blower.
•
Use a dry soft cloth to clean the body. If it
is very dirty, use a cloth dampened with a
small quantity of neutral detergent then
wipe dry.
13. Unplug this apparatus during lightning
storms or when unused for long periods
•
Avoid the use of volatile solvents such
of time.
as thinners, alcohol, benzene and
insecticides.
14. Refer all servicing to qualified service
They may damage the surface finish and/
personnel. Servicing is required when
the apparatus has been damaged in any
or impair the operation of the camera.
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
Operating and storage
objects have fallen into the apparatus, the
location
apparatus has been exposed to rain or
moisture, does not operate normally, or
Avoid viewing a very bright object (such as
has been dropped.
light fittings) during an extended period. Avoid
operating or storing the unit in the following
locations.
•
Extremely hot or cold places (operating
temperature -20 °C to 50 °C, however, we
recommend that the unit be used within
a temperature range of 0 °C to 45 °C)
•
Damp or dust place
•
Places exposed to rain
•
Places subject to strong vibration
•
Close to generators of powerful
electromagnetic radiation such as radio
or TV transmitters.
a BNC connector cover cap
b Video output BNC connector
c Power input terminal
This camera must always be operated AC 24 V.
Certified/Listed Adaptor which comply with LPS.
d AUDIO IN / OUT (Line Level Input / Output)
Input for a mono microphone, or a line-in mono signal.
Connect to an active speaker with a built-in amplifier.
e Data Input Terminal
Input data terminal for alarm signal.
f Data Output Terminal
Output data terminal for alarm signal.
g IP Reset
h ETHERNET Port
Connects to a PC or a network via a hub with a 10 BASE-T/100 BASE-TX cable attached
RJ-45 connector.
i Dome Cover
Accessories
•
Software Installation CD
•
Cover adaptor
•
Mount adaptor
•
RJ-45 Cable
•
Wrench
•
M3 SAMS Screws
Advertisement
Related Manuals for LG LNP2810 series
Summary of Contents for LG LNP2810 series
- Page 1 0 °C to 45 °C) and used in accordance with the instruction manual, may cause harmful interference to radio point where they exit from the apparatus. LG Electronics European Shared Service Center B.V. communications. • Damp or dust place 11.
- Page 2 ALARM OUT 1A Blue Speaker Device Connect sensor and alarm devices to • LG Electronics is not responsible for deleted data caused by user mishandling when you ALARM OUT 1B Violet corresponding terminals accordingly. Optionally connect an active speaker and/or insert or remove the SD card.