11. Installation Instruction (E9RK and E12RK) 11.1 Select the Best Location 11.1.3 Indoor/Outdoor Unit Installation Diagram 11.1.1 Indoor Unit Do not install the unit in excessive oil fume area Piping direction Do not bend up (Front side) drain hose such as kitchen, workshop and etc. Right There should not be any heat source or steam Rear...
11.2 Indoor Unit 11.2.1 How to Fix Installation Plate The mounting wall shall be strong and solid enough to prevent it from the vibration. Wall Wall Wall More than 1 More than 1 Indoor unit More than 2 screw " (128 mm) "...
11.2.3 Indoor Unit Installation Do not turn over the unit without it’s shock absorber during pull out the piping. It may cause intake grille damage. Use shock absorber during pull out the piping to protect the intake grille from damage. Piping Piping Intake grille...
Replace the drain hose Rear view for left piping installation Connection cable Piping More than 37 " Drain hose (950 mm) Drain hose Drain hose Connection Drain cap cable Sleeve for piping hole Adjust the piping slightly downwards. • • How to pull the piping and drain hose out, in case of embedded piping.