Snapshot Specifications - Hitachi AMS2100 User Manual

Ams 2000 family copy-on-write snapshot
Hide thumbs Also See for AMS2100:
Table of Contents

Advertisement

SnapShot specifications

Table A-1 lists external specifications for SnapShot.
Table A-1: General Specifications
AMS model
Host interface
Number of pairs
Cache Memory
Command devices
Differential Management LU
(DMLU)
Unit of pair management
Number of V-VOLs per P-VOL
RAID level
Combination of RAID levels
LU size
Drive types for the P-VOL and
data pool
Consistency Group (CTG)
number
A–2
Hitachi AMS 2000 Family Copy-on-Write SnapShot User Guide
Item
AMS2100/AMS2300/AMS2500
(For dual configuration only.)
Fibre channel or iSCSI.
AMS2300/AMS2500: 2,046 maximum
AMS2100: 1,022 maximum
Note: When a P-VOL is paired with 32 S-VOLs, the
number of pairs is 32.
AMS2500: 8, 16 GB per controller
AMS2300: 4, 8 GB per controller
AMS2100: 2, 4 GB per controller
Required for CCI.
Maximum: 128 per array
Volume size: 33MB or greater
Minimum size: 10 GB
One DMLU is required, two (maximum) are
recommended. When using two, each must be:
-
-
Volumes are the target of SnapShot pairs, and are
managed per logical unit.
1:32
RAID 1+0 (2D+2D to 8D+8D)
RAID 5 (2D+1P to 15D+1P)
RAID 6 (2D+2P to 28D+2P)
RAID 1 (1D+1D)
All combinations are supported between LUs for the P-
VOL and POOL. The number of data disks may be
different.
The LU size of the P-VOL must be equal in size to the
V-VOL. The max LU size is 128 TB.
If the drive types are supported by the array, they can
be set for the P-VOL and data pool. SAS drives,
SAS7.2K drives, SSD drives, or the SAS (SED) drives
are recommended. A DP-VOL cannot be a P-VOL.
Up to 256 consistency groups allowed per array.
AMS2300/AMS2500: 2,046 pairs per CTG
(maximum)
AMS2100: 1,022 pairs per CTG (maximum)
Specifications
Specification
In different RAID groups than the other
Under different controller than the other

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ams2300Ams 2500

Table of Contents