Table of Contents
Advertisement
22
en | Hardware Installation
5.
Fig. 3.5 Drive Tray Key-lock Rotation
6.
7.
F.01U.027.797 | V1 | 2006.05
between the HDD and the subsystem will not be secure. DO NOT slam the drive tray into
place! The connector pins might be damaged. If the front flap is not closed properly, the
connection between the hard drive and the subsystem will not be secure.
Lock the flap into place by turning the key-lock until the groove on its face is pointing
down (vertical orientation). (See Figure 3.5)
Once all drive trays are installed, the RAID subsystem will poll the drive channels and rec-
ognize the drives and scan them in automatically.
When powered up, you should check the LEDs on drive bezels to ensure all drives are
receiving power and are functional. All drive LEDs should be solid green after the initial-
ization stage.
RAID Subsystem DVA-08K | Installation Manual
Bosch Security Systems
Advertisement
Table of Contents
