Chapter 2 Installation
This chapter provides instructions for installing the module. The following topics are covered.
•
Pre-Installation check
•
Module installation and removal
•
Port connections
•
LED indications
•
Firmware updates
For additional information about RX3i system installation, refer to PACSystems RX3i System Manual,
GFK-2314. For all EIS001 module installation procedures, use ETM001 as a reference since EIS001 is
constructed on the ETM001 hardware platform.
You will also need Proficy Machine Edition (PME) configuration and programming software, version
8.50 SIM 9 or later.
GFK-2949C
July 2017
14