Table of Contents
Advertisement
System Manual
C79000-D8576-C199-03
To configure your PLC with expansion units (EUs) you will need the
following chapters:
• • Chapter 2 shows how you can configure a PLC with expansion
units in a centralized or distributed arrangement.
• • Described in Chapter 4, Section 4.2, are the EU 183U, EU 184U,
EU 185U and EU 187U. Those EUs which operate with their own
power supply unit are described in Section 4.3.
• • Chapter 7 describes the interface modules (IMs) which serve for
data communication between central controllers and expansion
units.
To operate two or more CPUs in multiprocessor mode in your PLC,
you will need Chapter 6.
• • Chapter 6 describes multiprocessor operation. This chapter
contains all the measures you must take for startup of the PLC in
multiprocessor operation. Described in Sections 6.5 and 6.6 are the
923C and 923A coordinators.
Given in the Chapter 10 are the connector assignments of the
individual modules and subracks.
Chapter 11 contains ordering data for the product described in this
manual and references to further reading.
Chapter 12 contains the Index of keywords in this manual.
Notes on Using this Manual/Overview
1
1 - 3
- Quick Links:
- S5-135U/155U
Hide quick links:
Advertisement
Chapters
Table of Contents
