Advertisement
Document No. 563-067
Installation Instructions
February 23, 2011
Antenna Mounting
Direct Mount Antenna
The preferred mounting configuration is to mount the
RSX outside the TEC enclosure in a location where
it will establish the communication link with its
associated WRS. For example, in a VAV application
this is typically on the bottom of the VAV box in the
ceiling plenum, with the entire antenna extending
downwards below the VAV box (Figure 2).
Figure 2. RSX Mounted Outside Enclosure.
Page 2 of 5
VAV BOX
VAV BOX
VAV BOX
Remote Mount Antenna
The RSX is mounted inside the TEC, or any metal
enclosure, and the antenna is brought through a
1/2 in. (1.3 cm) knockout (Figure 3).
The antenna extension cable is 12 in.
(30 cm) long.
Figure 3. RSX Mounted Inside Enclosure.
NOTE: Due to small attenuation in the remote
mount antenna cable, ranges are decreased
slightly compared to the direct mount
antenna.
Siemens Industry, Inc.
Advertisement
