Installation Procedure
Installation Procedure
1
Unpack all items and check
for damaged or missing parts.
See page 8 for details.
2
Install the trunk card
See page 9 for details.
3
Install the CPU card
See page 12 for details.
4
Mount the SL2100 system on
the wall or in the rack
See page 14 for details.
5
Connect the telephones.
6
Connect the External MOH
Device.
7
Connect the exchange lines.
See page 18 for details.
8
Connect the power and switch
on the SL2100.
See page 20 for details.
9
Configure the SL2100 to the
customer's requirements.
See page 21 for details.
10
Security
!
Consider the operation during
power failure
Power Fail Operation
In event of a power failure, the trunk connections are not automatically rerouted. For power failure it is
recommended to connect a socket for each Analogue trunk in parallel with the SL2100.
Quick Install Guide – SL2100 with Analogue Trunks rev 1.1
! Within suitable cabling distance from the exchange lines.
! Within suitable distance from a power socket and Earth point.
! Check the other installation considerations in section 3.
See separate Quick Install Guide for the terminal type being installed
Optional
See separate Quick Install Guide for the terminal type being installed
Use SL2100 PCPro software
Ensure the system is protected against Toll Fraud and has secure
maintenance passwords
Will require additional parts if required
7