Troubleshooting
Problem
No dial tone
Caller Number
ID only
Battery LED is
off
22
Make sure the device is turned on (Power
•
indicator is green) and there is AC power to
the Wireless Home Phone device. Do not
connect to an AC outlet controlled by a wall
switch.
Move the device to an area with sufficient
•
network signal (at least 1 to 2 green bars are
displayed).
Make sure your home telephone equipment
•
has power and is connected properly to the
Wireless Home Phone device.
Like all wireless services, only the calling
•
number is displayed with Caller ID.
Your home phone equipment may support
•
the display of names stored in its contacts
memory.
Plug your Wireless Home Phone device into
•
an AC outlet to charge the battery.
Possible Solution