Sony NV-U51 Installation Manual page 2

Nav-u

Hide thumbs Also See for NV-U51:

Windscreen installation

Note

If you are concerned about car vibration and want to stabilize the unit,

cut the supplied pad  to the appropriate size and attach it to the cradle

bottom, to sit between the cradle and dashboard.

Dashboard installation

POWER

OFF

See also "Turning the unit on" in the supplied Quick Start Guide.

Note

Before attaching the suction cup, clean the attachment surface.

Tip

Retain the removed protection sheet and attach it to the suction cup

when you detach the cradle from the windscreen to keep the suction

cup clean.

1st click

Choose an attachment surface that is ﬂ at, smooth and as

horizontal as possible, otherwise the cradle may not attach

properly.

Before attaching the supplied sheet , clean the attachment

surface. Then, proceed from step

above.

Note

If you are concerned about car vibration and want to stabilize the unit,

cut the supplied pad  to the appropriate size and attach it to the cradle

bottom, to sit between the cradle and dashboard.

2nd click

After the initial installation, park your car in a safe,

open place (no high buildings, etc.) for up to 20 minutes

to allow for GPS signals to be received before using the

navigation system.



Press the button completely.