Table of Contents
Advertisement
b. Use Dell Storage Manager to determine the number of drives that are accessible after adding the expansion enclosure to
the Storage Center.
Connect the Power Cables
Connect the power cables to the SCv360 expansion enclosure.
About this task
Steps
1.
Connect the power cables to the power supplies in the expansion enclosure.
Figure 28. Connect Power Cables to the Power Supplies
1.
Left power supply
2.
Secure each power cable to the expansion enclosure using the strain relief clamp.
3.
Connect the power cables plugged into the left power supply to one PDU.
4.
Connect the power cables plugged into the right power supply to a second PDU.
5.
Label both ends of the power cords to identify the power supply and PDU to which each power cord is connected.
Install the Front Bezel
If a front bezel is shipped with the SCv360 expansion enclosure, install the bezel on the front of the expansion enclosure.
1.
Align the bezel with the front of the expansion enclosure.
2.
Press the two latches on front of bezel.
30
SCv360 Expansion Enclosure Installation
2.
Right power supply
Advertisement
Table of Contents
