Panasonic KX-TDE100 Features Manual page 308
Pure ip-pbx
Hide thumbs
Also See for KX-TDE100:
- Programming manual (1018 pages) ,
- Pc programming manual (982 pages) ,
- Features manual (460 pages)
Table of Contents
Advertisement
1.26 Administrative Information Features
c)
Word Length: A word length code indicates how many bits compose a character.
→ 2.17.1 [11-1] Main—RS-232C—Communication—Word Length
→ [800] RS-232C Parameter—Word Length
d)
Parity Bit: A parity code indicates what type of parity is used to detect an error in the string of bits
composing a character. Make an appropriate selection depending on the requirements of the PC
or printer.
→ 2.17.1 [11-1] Main—RS-232C—Communication—Parity Bit
→ [800] RS-232C Parameter—Parity Bit
e)
Stop Bit Length: A stop bit code indicates the end of a bit string which composes a character.
Select an appropriate value depending on the requirements of the PC or printer.
→ 2.17.1 [11-1] Main—RS-232C—Communication—Stop Bit
→ [800] RS-232C Parameter—Stop Bit Length
•
If a call is transferred to an ICD group or PDN extension using Automatic Transfer, the condition code
"TR" will not be recorded on SMDR (→ 1.12.1 Call Transfer).
[Host PBX Access Code]
•
The dialled number including the Host PBX Access code will be recorded on SMDR only if the modified
number setting is selected in the ARS setting for SMDR.
•
When a Host PBX Access code is assigned to a trunk group, calls to extensions of the host PBX are
not recorded on SMDR.
•
A Host PBX Access Code can be used to record only long distance calls on SMDR when a trunk port
is connected directly to the telephone company (not a host PBX). This is allowed when the long
distance code (e.g., "0") is assigned as the Host PBX Access code. All local calls (e.g., calls that do not
require a "0" to be dialled first) are treated as extensions of the telephone company and do not get
recorded on SMDR, because in this case this PBX recognises the telephone company as the host PBX.
Therefore, only long distance calls are recorded on SMDR.
[Output to a Telnet compatible Terminal Emulator]
•
In order to activate a connection to a terminal emulator, the IP address of the IPCMPR card, port
number, user ID ("SMDR"), and password must be entered.
•
If a terminal emulator user incorrectly enters the user ID or password 3 times consecutively, an alarm
will be sent and connection will not be possible for 10 minutes.
•
Through system programming, it is possible to assign the PBX port number and password.
Installation Manual References
3.12.1 Connection of Peripherals
Programming Manual References
PC Programming Manual
2.8.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Analogue CO Call Duration Start
2.8.12 [2-7-1] Class of Service—COS Settings—CO & SMDR—Outgoing CO Call Printout (SMDR)
2.12.9 [6-8] Hotel & Charge
→ Main—SMDR for External Hotel Application 2—Printing Message 1–8
→ Charge—Charge Options—Currency
2.17.1 [11-1] Main
→ SMDR
→ SMDR Options
308
Feature Guide
- Quick Links:
- Incoming Call Features
Hide quick links:
Advertisement
Table of Contents
