Table of Contents
Advertisement
PERIODIC MAINTENANCE AND ADJUSTMENT
Supporting the motorcycle
Since this model is not equipped with a
centerstand, follow these precautions
when removing the front and rear
1
wheel or performing other maintenance
requiring the motorcycle to stand up-
2
right. Check that the motorcycle is in a
stable and level position before starting
3
any maintenance. A strong wooden
box can be placed under the engine for
added stability.
4
To service the front wheel
5
1. Stabilize the rear of the motorcycle
by using a motorcycle stand or, if
6
an additional motorcycle stand is
not available, by placing a jack un-
der the frame in front of the rear
7
wheel.
2. Raise the front wheel off the
8
ground by using a motorcycle
stand.
9
To service the rear wheel
Raise the rear wheel off the ground by
using a motorcycle stand or, if a motor-
cycle stand is not available, by placing
a jack either under each side of the
EAU24350
frame in front of the rear wheel or under
each side of the swingarm.
7-32
Front wheel
To remove the front wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Disconnect the speedometer ca-
ble from the front wheel by remov-
ing the clip, then pulling the cable
out.
2
1
1. Clip
2. Speedometer cable
2. Loosen the brake cable locknut
and the brake cable free play ad-
justing nut at the front wheel hub.
EAU24360
EAU35033
EWA10821
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
