(2) Disconnect the power supply PCB harness from the guide behind the machine, and pull it
out from the hole.
(3) Remove the screw pan (S/P washer) M3.5x6 screw and the four taptite bind B M3x10
screws to remove the power supply earth harness, the main PCB earth plate, and the
power supply unit from the machine.
Screw pan (S/P washer) M3.5x6
Taptite bind B M3x10
Power supply earth harness
Taptite bind B M3x10
Main PCB earth plate
Power supply
PCB harness
Hole
Fig. 3-33
3-34
Power supply unit
Guides
Confidential