D Commands
dot1x system-auth-control
To enable 802.1X authentication, use the dot1x system-auth-control command. To disable 802.1X
authentication, use the no form of this command.
dot1x system-auth-control
no dot1x system-auth-control
Syntax Description
This command has no arguments or keywords.
Command Default
Enabled
Command Modes
Global configuration
Command History
Release
4.0(1)
Usage Guidelines
The dot1x system-auth-control command does not delete the 802.1X configuration.
You must use the feature dot1x command before you configure 802.1X.
This command does not require a license.
Examples
This example shows how to disable 802.1X authentication:
switch# configure terminal
switch(config)# no dot1x system-auth-control
This example shows how to enable 802.1X authentication:
switch# configure terminal
switch(config)# dot1x system-auth-control
Related Commands
Command
feature dot1x
show dot1x
Modification
This command was introduced.
Description
Enables the 802.1X feature.
Displays 802.1X feature status information.
Cisco Nexus 7000 Series Security Command Reference
dot1x system-auth-control
205