Table of Contents
Advertisement
Chapter 3 – Configure the Printer
General Settings (continued)
Setting
Int'l Character Set
Zero Option
CR Code
LF Code
Idle to Sleep
Advanced Settings
Advanced Settings
Setting
Horizontal Pitch
Vertical Pitch
34
Description
Selects the national character set:
•
USA
•
FRANCE
•
GERMANY
•
ENGLAND (UK)
•
DENMARK I
•
SWEDEN
•
ITALY
•
SPAIN I
•
JAPAN
•
NORWAY
•
DENMARK II
•
SPAIN II
•
LATIN AMERICA
•
HEBREW
•
GREECE
Sets whether the zero character prints with or without a slash. NO SLASH
Sets whether or not 'CR' performs a line feed in addition to a
carriage return.
Sets whether or not 'LF' performs a carriage return in addition
to a line feed.
Sets the method for the inactivity sleep timer:
•
FOLLOW ESC z: Timer is set by the ESC "z" command.
Default is 10 seconds.
•
1 MINUTE ... 4 HOURS: Printer goes to sleep mode after
idling for the specified time.
This section lists advanced settings for the printer. To view these settings, in the
Printer Configuration Utility click the Advanced Settings tab.
Description
Sets horizontal pitch:
•
10 CPI: 10 characters per inch. Corresponds to ESC "P", Select
Pica Pitch.
•
12 CPI: 12 characters per inch. Corresponds to ESC "M",
Select Elite Pitch.
Sets vertical pitch:
•
1 to 12 LPI: Specified in lines per inch.
•
1 to 4 LPCM: Specified in lines per centimeter.
Default
USA
CR = CR (carriage
return only)
LF = LF (line feed only)
5 MINUTES
6824 Mobile Full Page Printer User Manual
Default
10 CPI
6 LPI
Hide quick links:
Advertisement
Table of Contents
