Advertisement
5
Logging Functions - PC Setup
To log the functions and setup the PC, do the following:
Connect the sensors as described previously and confirm correct operation.
1.
Unplug the surface temperature sensor, if fitted. Connect the instrument to the serial port on
2.
the host PC, using the supplied cable.
Switch ON the instrument and ensure that the side socket is set to RS232 mode and the
3.
computer icon
Start the PC software and select Tools
4.
automatically).
Confirm that the instrument serial number has been read correctly (not shown as "-"). This
5.
would indicate that the communications have been established. If not, check settings under
the "Communication" tab.
Click on "Set Time" to set the instrument clock to the PC clock time.
6.
GE Protimeter Hygromaster
is lit.
Setup (if the setup dialogue has not started
Page 16
Hide quick links:
Advertisement
