Table of Contents
Advertisement
RUGGEDCOM WiN5100/WiN5200
User Guide
Installation Procedure
Section 4.1
Safety Hazards
WARNING!
Installing the WiN5100/WiN5200 ODU CPEs can pose a serious hazard. Be sure to take precautions to
avoid the following:
• Exposure to high voltage lines during installation
• Falls when working at heights or with ladders
• Injuries from dropping tools
• Contact with AC wiring
During antenna installation, observe the following:
• For WiN5149/WiN5249 and WiN5158/WiN5258, always install the antenna at least 0.65 m from
people and public areas. For other models, always install the antenna at least 0.39 m from people
and public areas.
• Antenna must be in a fixed position.
• After it is installed, do not change the antenna position.
Section 4.2
Required Installation Tools
• Flat screwdriver
• Wrench or socket set
• Torque wrench
• Drill
• RJ-45 connector crimping tool
Section 4.3
Required Cables
• IDU-to-ODU Category 5e Ethernet cable (maximum 80 m) and two RJ-45 plug connectors
• Ground cable with an appropriate termination
Safety Hazards
Chapter 4
Installation Procedure
21
- Quick Links:
- Connecting to and Logging in to...
Hide quick links:
Advertisement
Table of Contents
