Table of Contents
Advertisement
BACKGROUND INFORMATION ON NETWORKING
Computers are assigned IP addresses by network operators, which have two methods available,
static or dynamic IP addressing. The user of this document will need to understand how IP
addressing is done at their particular location.
All Canopy radio products (Subscriber Modules, Access Point Modules, and Backhaul Modules)
have the default IP address of 169.254.1.1. For a computer to talk to Canopy, as it comes from the
factory, either of the following conditions must be met:
•
If the computer is not configured for DHCP, then it has to have a static IP address on
the 169.254 network (i.e. 169.254.1.5)
•
If the computer is configured for DHCP, then it will automatically obtain an IP address
on the 169.254 network after minute or two as long as it is not connected to the
network.
AP_CMM2 User Manual
Page 14 of 49
Hide quick links:
Advertisement
Table of Contents
