Table of Contents
Advertisement
4 SETUP AND PREPARATION BEFORE OPERATION
4 SETUP AND PREPARATION BEFORE OPERATION
4.1 Pre-Operation Procedure
This section explains the preparatory procedure for operating the AJ65VBTCU-
68ADVN/ADIN.
Mode select switch setting
Create a program.
(refer to Section 4.3, Section 4.4)
Create a program. (Refer to Chapter 5.)
Create a program.
Offset/gain setting (Refer to Section 4.5.)
4.2 Precautions When Handling
The precautions when handling the AJ65VBTCU-68ADVN/ADIN are described below:
CAUTION
4 - 1
START
Make offset/gain setting?
Yes
Start data link.
END
Do not touch the pins while power is on. Doing so can cause a malfunction.
Ensure that no foreign matter such as chips and wire-offcuts enter the module.
Foreign matter can cause a fire, failure or malfunction.
Do not disassemble or modify the module.
Doing so can cause a failure, malfunction, injury or fire.
Do not touch the conductive and electronic parts of the module directly.
Doing so can cause the module to malfunction or fail.
No
MELSEC-A
4
4 - 1
Advertisement
Table of Contents
