Table of Contents
Advertisement
5 - 14 Symbol PL4507 Decoder Integration Guide
Snapshot Mode Timeout
Parameter # F0h 43h
This parameter sets the amount of time the decoder remains in Snapshot Mode. The decoder exits Snapshot Mode
upon a trigger event, or when the Snapshot Mode Timeout elapses. To set this timeout value, scan the bar code
below followed by a bar code from
seconds; values increment by 30. For example, 1 = 60 seconds, 2 = 90 seconds, etc.
Snapshot Mode Timeout
Snapshot Aiming Pattern
Parameter # F0h 2Ch
Select Enable Snapshot Aiming Pattern to project the aiming pattern when in Snapshot Mode, or Disable
Snapshot Aiming Pattern to turn the aiming pattern off.
*Enable Snapshot Aiming Pattern
Appendix D, Numeric Bar
(01h)
Codes. The default value is 0 which represents 30
Disable Snapshot Aiming Pattern
(00h)
Advertisement
Table of Contents
