Power Supply - Siemens SINUMERIK 810DE powerline Equipment Manual
Sinumerik 810d configuration ccu
Hide thumbs
Also See for SINUMERIK 810DE powerline:
- Function manual (2184 pages) ,
- Diagnostics manual (1002 pages) ,
- Programming manual (687 pages)
Table of Contents
Advertisement
3.3
Power supply
Power supplies are available as a stabilized infeed/regenerative feedback
module (I/R module) and as an open-loop control infeed module (OI) The pro-
vide the necessary operating voltages and the necessary power for the system
in different power ranges.
The I/R modules can feed excess DC link energy (e.g. in braking operation)
back into the network. OI modules dissipate the braking energy in a pulsed
resistor.
The power supply module is the first module on the left in the sequence of
modules.
Line filters must be used to comply with the EMC rules of the CE standard.
Terminals
"Ready" message from NC and drive.
72, 73, 74
Terminals 72 and 73 are closed in the fault-free condition.
Permissible
S
modules
S
Note
The power supply and filter modules/reactors are described in the
Configuration Manual Converters SIMODRIVE 611 digital (settings, technical
data, circuit suggestions).
Danger
!
A hazardous voltage will be present for a further 5 minutes after the system has
been shut down.
Copyright © Siemens AG 2006
SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition
Power supply module:
OI 5 kW, OI 10 kW, OI 28 kW,
I/R 16 kW, I/R 36 kW, I/R 55 kW; I/R 80 kW;
I/R 120 kW
SIMODRIVE filter modules or commutation reactors
3 Design and Installation of the 810D
3.3 Power supply
J
3-45
Hide quick links:
Advertisement
Table of Contents
