Table of Contents
Advertisement
CHAPTER 1.
R2000
This chapter introduces SMT-R2000 and describes the configuration and specifications of
SMT-R2000.
1.1 SMT-R2000 Overview
SMT-R2000 is a wireless LAN Access Point(AP) that is available in the construction of
a wireless network and can be used as a wireless LAN repeater.
As a wireless LAN repeater, SMT-R2000 is installed within the cell area of AP or the repeater,
and re-transmits the data of wireless terminals, such as wireless notebook and wireless PDA,
in the outside of the cell area of neighboring AP to AP.
Ÿ
AP: The AP for wireless LAN is an access device for wireless network connection and
performs the relay function among wireless terminals and wired LAN. In general, the
AP has a specified use area and a specific frequency.
Ÿ
Repeater: If AP signal for wireless LAN is transferred over a specified distance, the
output signal will be attenuated. Therefore, a device that creates new wave or raises
output voltage is required to enlarge the transfer distance. To do so, the wireless LAN
repeater is used as a device to restore and relay the transfer signals.
© SAMSUNG Electronics Co., Ltd.
Introduction of SMT-
SMT-R2000 Service Manual
1-1
Hide quick links:
Advertisement
Table of Contents
