Fujitsu M10 Product Notes page 184
Hide thumbs
Also See for M10:
- Installation manual (374 pages) ,
- Product notes (172 pages) ,
- Installation planning manual (136 pages)
Table of Contents
Advertisement
Table 3-25 Problems resolved in Oracle Solaris 11.2 (continued)
SPARC M10-
Bug
1
4
4S
15823255
x
15825208
x
x
x
15826052
x
x
x
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240 ･ March 2015
170
Description
An Oracle Solaris panic may occur if the
CPU allocation is changed using the
psradm(1M) or psrset(1M) command or
the configuration of a virtual CPU is
dynamically changed using the ldm(1M)
command under the environment that
meets the following two conditions.
- The environment where the physical
partition (PPAR) is composed of two or
more SPARC M10-4S chassis.
- The environment where the following
lgroup exists when the lgrpinfo
command is executed on the control
domain or logical domain.
Among the lgroups that are displayed as
"lgroup XX (intermediate):",
only one number is displayed before
(CPU) of the "Lgroup resources:" field.
This number is not displayed before
(memory)
[Example]
# /usr/bin/lgrpinfo
...
lgroup 12 (intermediate):
Children: 10, Parent: 0
CPUs: 0 1
Memory: installed 520M,
allocated 494M, free 26M
Lgroup resources: 1 (CPU); 10 11
(memory)
Latency: 21
...
In SPARC M10 Systems, the scp(1),
sftp(1), and ssh(1) commands of Oracle
Solaris may generate an error or
installation of Oracle RAC may fail.
You cannot use the PCI hot plug (PHP)
function to add a Quad Gigabit Ethernet
card (SE1X7GQ2F) to a PCI-Express slot
of a PCI expansion unit.
Workaround
This has been modified with Oracle
Solaris 11.1 SRU5.5, and the patch
150400-01 for Oracle Solaris 10.
Add the following line to /etc/system and
restart Oracle Solaris:
set lgrp_topo_levels=2
This has been modified with Solaris 11.1
SRU1.4.
For details, see
"An error occurs in
executing the scp(1), sftp(1), or ssh(1)
command of Oracle Solaris or the
installation of Oracle RAC fails
(CR:15825208)."
This has been modified with XCP 2050
and SRU11.1.6.4.0.
For XCP 2050, see the description of
RTIF2-130528-001.
If XCP and SRU are not applied, stop the
logical domain to which you want add
the PCI card before adding it.
Advertisement
Table of Contents
